Flat Wire Manufacturing

Flat Wire Manufacturing
With over 50 years of experience, United Wire Company, Inc. has grown to become one on the specialists in manufacturing Flat Wire. Our Flat Wire is available in many alloys and is produced in multiple edge classifications such as; Square Edges, Rounded/Broken Corners, Natural Rounded Edges and Full Rounded Edges.
Flat Wire: Advantages
Specialty and Custom Edges
Small to Large Width Shaped Wire sizes
Close Dimensional Tolerances
Burr Free
Flat Wire: Shapes & Sizes
Edges Available:
Square Edges
Rounded/Broken Corners
Natural Rounded Edges
Full Rounded Edges
Smallest Width Shaped Wire: .020″
Largest Width Shaped Wire: .750″
Flat Wire: Edges Available

Flat Wire Manufacturing

Flat Wire Manufacturing
No. 1 Edge
A Smooth, uniform, round or square edge, either slit or filed or slit and edge rolled as specified, width tolerance +- .005″.

No. 2 Edge
A natural round mill edge carried through from the hot rolled band. Has not been slit, filed, or edge rolled. Tolerances not closer than hot-rolled strip limits.

No. 3 Edge
Square, produced by slitting only. Not Filed. Width tolerances close.

No. 4 Edge
A round edge produced by edge rolling either from a natural mill edge or from slit edge strip. Not as perfect as No. 1 Edge. Width tolerances liberal.

No. 5 Edge
An approximately square edge produced by slitting and filing or slitting and rolling to remove burr.

No. 6 Edge
A square edge produced by square edge rolling, generally from square edge hot-rolled occasionally from slit strip. Width tolerances and finish not as exacting as No. 1 Edge.

 

For more information about United Wire and Flat Wire Manufacturing, visit:

http://unitedwirecompany.com/flat-wire.html#fw

 

STAINLESS STEEL WIRE: FLAT, SHAPED AND SQUARE

FEATURED WIRE MATERIAL: STAINLESS STEEEL

StainlessSteelWireManufacturer

ALL TEMPERS OFFERED: From Fully Annealed Up To Spring Temper

Available In: Flat Wire, Square Wire & Shaped Wire

Available Finishes: Bright, Brush & Matte

For More Information about Stainless Steel Custom Shaped Wire, click link:

http://www.unitedwirecompany.com/stainless-steel.html#ss

COPPER WIRE: FLAT, SHAPED AND SQUARE

FEATURED WIRE MATERIAL: COPPER BASES

SHAPED COPPER WIRE

ALL TEMPERS OFFERED: From Fully Annealed Up To Spring Temper

AVAILABLE IN: Flat Wire, Square Wire, & Shaped Wire

TEMPER CLASSIFICATIONS:

TEMPER   –   HARDNESS

Annealed   –   Commercially Soft

Quarter Hard    –   One Numbers Hard

Half Hard   –   Two Numbers Hard

Hard Temper   –   Four Numbers Hard

Extra Hard   –   Six Numbers Hard

Spring Temper   –  Eight Numbers Hard

Extra Spring Temper   –   Ten Numbers Hard

For more information, click link…

http://www.unitedwirecompany.com/copper.html#cb